A purchase order is the order-stage procurement panel for an existing purchase job. Use this page after a quotation has been converted to an order, before activation, receipt, and Warehouse work. Direct purchase-order creation is covered by Create a direct purchase order; locating the existing job is covered by Find active purchase job work.
Manage purchase orders
The purchase-order panel carries an order through approval, award submission, activation, and receipt-related work. The procurement lifecycle places the order stage after quotation work and before the received stage.
| If you need to… | Go to |
|---|---|
| Find the saved purchase job that contains the order | Find active purchase job work |
| Review the quotation before its hand-off | Manage purchase-job quotations |
| Open and review the order panel | Find and open the purchase job |
| Read or complete order fields | Order information |
| Save an editable order or request approval | Save the order and request approval |
| Approve the order award | Approve and submit the order award |
| Activate an order or record order-side receipt | Activate the order and record receipt |
| Amend, correct, cancel, reject, or return an order | Amend, correct, or close the order |
| Review comments, files, and history | Comments, files, and history on a purchase job |
| Continue with physical receipt and stock work | Warehouse fulfillment flow |
| Create an order without quotation conversion | Create a direct purchase order |
The order panel is the place for the order-side decisions in this flow. Physical receiving, stock handling, and Warehouse operations belong to Warehouse fulfillment flow.
Before you start
A saved order is required for approval and award actions. The order area is available only when the subscription and page are available, the purchase job is in the order-through-delivered range, and the order is open.
| Check before you begin | Why it matters |
|---|---|
| The purchase job already exists and the order is saved | Approval and award actions require an existing saved order. |
| The purchase job is between Order and Delivered | The order area and its actions are stage-dependent. |
| You have edit access | Saving, approval, award, activation, and corrective actions use the edit-access guard. |
| The order has no unsaved changes before approval or award | Approval and award actions require a saved, unchanged order. |
| Your company knows whether approval is enabled | Request Approval and Approved appear under different approval conditions. |
| Your company knows whether the mail feature is available | Send order award to Sub-supplier is shown when mail is available; otherwise Consider PO award as submitted is shown. |
| The purchase-order mandatory-field configuration is known | Fields marked configurable are required only when the company configuration makes them mandatory. |
After approval, the order panel is read-only unless editing is allowed. You can edit an order at or after Approved but before Delivered, or when it is marked as awaiting activation. Confirm the approver through your company’s approval assignment before requesting approval.
Find and open the purchase job
Use this procedure to review an existing order without selecting a state-changing action.
Prerequisites
- You know the saved purchase job to open.
- The job is available in the purchase-job work list.
Steps
- Open the saved purchase job record.
- Select PO.
- Expand the order panel.
- Open the order action menu.
- Review the fields and actions without selecting an action that changes the order.
The PO tab opens with the expanded panel, Sub-supplier, Order Date, and PO/Draft state.
You can review the panel and action menu without changing the order.
Result: The PO panel is open, the order fields and current actions are visible, and the order remains unchanged.
Understand the purchase-order workspace
The purchase-order workspace combines the order summary, editable order information, item table, totals, currency area, payment milestones, related tabs, and a state-dependent action menu. The order action menu changes with the order state and company features.
| Workspace area | What you use it for |
|---|---|
| Order summary and editor | Review the supplier, number, dates, terms, payment, status, and logistics information. |
| Item grid | Review or change item quantities, prices, discounts, and tax values when editing is available. |
| Totals and currency area | Review item totals, tax, total price including tax, local-currency values, and currency rate entry. |
| Payment-milestone area | Review logistics costs and the payment milestone when the milestone surface applies. |
| Related tabs | Open MRQ, RFQ, Offer, PO, Received, Attachment, Purchase Invoices, or Last Modifications. |
| Supporting areas | Use Attach File, No Files, and Tickets where those surfaces are available. |
| Action menu | Review state-dependent actions such as Approved, Purchasing PO template, Cancel PO, and Back to Offer. |
The item grid shows the following columns.
| Item-table column | Use |
|---|---|
| Product and Unit | Identify the product and its unit. |
| Qty | Review or change the quantity when editing is available. |
| Unit Price and Item Price | Review the unit and calculated item prices. |
| Currency | Identify the row currency. |
| Stage | Review the item stage. |
| Discount (%) and Tax (%) | Review or change the percentage values when editing is available. |
| Category and MRQ Qty. | Review the category and MRQ quantity. |
The order grid uses the columns listed above. Name and Item Description do not appear in the order grid.
The totals area includes Count, Product, Tax, Currency, Total Price: incl. tax,
In Local Currency, Enter rate, and Backlog. The payment area can show
Logistics Costs - Payment Milestone (1 Installment(s)). The Payment Milestone area appears
for the applicable offer- or order-milestone popup, and Enter rate appears when the order
currency differs from the sales currency.
Dates use the product's dd MMM yyyy display format. Order Date cannot be later than today.
Order Activation Date and Forecasted Receiving Date cannot be earlier than Order Date.
Order information
Order information records who receives the order, how it is delivered and paid, what it costs, and which dates and state details govern the next action.
| Area | Fields and rules |
|---|---|
| Supplier and identifiers | Sub-supplier, PO No., Sub-Supplier Order No., and External PO no. identify the order and its supplier-side reference. Vendor is not a separate reader-facing order field here. |
| Dates | Order Date, Forecasted Receiving Date, Forecasted Shipping Date, Actual Shipping Date, Forecasted In-port Arrival Date, Actual In-port Arrival Date, and Forecasted Out-port Leaving Date describe order and logistics timing. Forecasted Receiving Date cannot be earlier than the order date. |
| Delivery and payment | Delivery Time, Delivery Term, Payment Method, L/C Number, and Payment Period carry delivery and payment choices. The Payment Method list contains company payment-method records and displays each record by Code. |
| State and receipt | Status, Is Partial Delivery Allowed, Order Activation Date, and Received On show or control order progression. Order Activation Date is optional and cannot be earlier than the order date. Received On is required in receipt popups and cannot be later than today. |
| Logistics and currency | Forecasted Logistics Costs and Logistics Costs accept non-negative values. The local-currency rate is required in its popup and cannot be negative. |
| Cancellation | Cancellation Reason is required in cancellation popups. Cancellation Date and Amount are not required there. |
| Rejection | Reject Date is required in rejection popups. |
Company configuration controls the required state of Delivery Time, Delivery Term, Payment Method, Payment Period, Status, and Cancellation Reason. Required markers appear on Sub-supplier, Purchaser, Product Type, and Package Title when company configuration makes them required.
Save the order and request approval
Save an order after changing editable order fields. Request approval only after the saved order passes validation and the company approval route requires another approver.
Prerequisites
- The order is saved and open.
- You have edit access.
- The order is in the order-through-delivered job-stage range.
- You know who your company has assigned to approve this order when approval is enforced.
Steps
-
In an editable order, enter or correct the required order information.
-
Select Save.
-
Enter the corrected value in the affected order field.
Message Correction Order must have at least one itemAdd at least one order item. Please enter action for each milstoneEnter an action for each payment milestone. Invalid input. The value must be greater than 0 and cannot exceed 999,999.00Correct the affected quantity. Invalid input. Please enter a non-negative valueEnter zero or a positive value in the affected price or cost field. Invalid input. The tax rate must be between 0 and 100Enter a tax rate from 0 through 100. -
Select the action again.
-
When approval is enabled and the order is below Approved, select Request Approval.
If the order has no item, the product grid cannot provide a complete order. If a configurable mandatory field is empty, use the field marker and the order information table above to complete that field before saving.
Result: The order is saved when validation passes. When approval is enabled and the order is
eligible, it enters the approval route and the order can show Order Awaiting Approval from Manager.
Approve and submit the order award
Approval changes the order's approval state; award submission then records that the approved order has been sent or treated as submitted to the Sub-supplier.
Prerequisites
- The order is saved with no unsaved changes.
- You are the person assigned by your company's approval configuration, or approval is disabled.
- For mail submission, the mail feature is available.
Steps
-
For an order that is below Approved, select Approved when you are allowed to approve it.
A successful approval displays
Order approved successfully. -
Select the award action that matches your company's approval and mail settings.
Condition Select Approval is enabled and the order is approved Send order award to Sub-supplier Approval is disabled or mail is unavailable Consider PO award as submitted
The mail branch requires an approved order when approval is enabled. The non-mail branch is shown
when the mail feature is unavailable and can also apply at or before Approved when approval is
disabled. The award actions produce Order submitted to sub-supplier; the mail branch also
produces Email Successfully Sent to sub-supplier .. Email Added to Activity Emails List.
Result: The order is approved by the assigned approver, then the available award-submission route records the award as submitted to the Sub-supplier.
Activate the order and record receipt
Activation records the move from awaiting activation into active order work. Receipt records the order-side received date; reversing receipt returns a delivered order to the not-received route. Physical receiving and stock operations remain in Warehouse fulfillment flow.
Prerequisites
- The order is saved with no unsaved changes.
- You have edit access.
- The order is in
Awaiting ActivationorConsider As Awaiting Activationfor activation, or in Delivered for reversing receipt.
Steps
-
Select the order-side action that matches the work in the table.
Work Action Activate an order awaiting activation Activate PO Record receipt The order-side receipt action Return a delivered order to the not-received route Consider as not received -
For activation, enter an Order Activation Date that is not earlier than the order date.
-
For receipt, enter Received On no later than today.
-
Select Ok when the activation-date popup is open.
If the receipt action displays Received Successfully, the order-side receipt message has been
returned. If reversing receipt displays unreceived Successfully, the order-side unreceipt message
has been returned. An undelivered order update can display
Order updated successfully. Undelivered. A draft invoice was deleted.
Result: The selected order-side activation or receipt action is complete on its available surface; the physical Warehouse receiving task remains separate.
Amend, correct, or close the order
Use the order action menu that matches the order's current state. An amendment creates a new Draft order, while correction and closure actions are available only in their stated order states.
| If the order is… | Select… |
|---|---|
| Valid or considered awaiting activation and you need a new version | Order amendment |
| An amendment draft that you need to remove | Order amendment |
| Approved or later but before Delivered, or considered awaiting activation, and editing is allowed | Enable Editing |
| Awaiting approval and you need to withdraw the request | Cancel Approval Request |
| Awaiting approval and the approver needs to reject the request | Reject Approval Request |
| Approved and you need to reverse that approval state | Consider as not approved |
| Valid or awaiting activation and you need to reverse award submission | Consider PO award as not submitted |
| Before receipt or rejection and you need to cancel it | Cancel PO |
| Valid or awaiting activation and you need to accept a rejected-order route | Rejected PO acceptance |
| Cancelled and you need to restore the order route | Consider P.O. as not Cancelled |
| Rejected and you need to restore acceptance | Consider PO acceptance as not rejected |
| Delivered and you need to reverse receipt | Consider as not received |
| Before approval on a non-direct order and you need to return it | Back to Offer |
Prerequisites
- The order state matches one row in the decision table.
- You have edit access and the order has no unsaved changes.
Steps
- Open the order action menu.
- Select the action in the row that matches the order's current state.
- Complete any popup fields required by that action, such as Cancellation Reason, Cancellation Date, Amount, or Reject Date.
Result: The selected amendment, correction, recovery, return, cancellation, rejection, or closure route is applied to the order state that made the action available.
When order work goes wrong
Steps
- Read the validation message.
- Enter the corrected value in the affected order field.
- Select the action again.
| Message | Corrective action |
|---|---|
Check PO mandatory field(s) | Enter the corrected value in the affected order field. |
Please insert at least one PO | Add the required purchase-order entry before continuing. |
Please insert at least one product | Add a product item before continuing. |
Check mandatory field(s) | Review the fields required by the applicable configuration. |
Order must have at least one item | Add an item to the order grid. |
Please enter action for each milstone | Complete the action for every payment milestone. |
Invalid input. The value must be greater than 0 and cannot exceed 999,999.00 | Correct the affected quantity. |
Invalid input. Please enter a non-negative value | Enter zero or a positive value in the affected price or cost field. |
Invalid input. The tax rate must be between 0 and 100 | Enter a tax rate from 0 through 100. |
An error occurred while processing your request | Review the order state and access, then repeat the action only when its action-menu condition is satisfied. |
Items labeled as ‘Ready for Shipment’ or ‘Delivered’ cannot be deleted | Keep those item rows in the order. |
Item(s) Reactivated | Review the item state after reactivation. |
Item(s) Regretted | Review the selected item state after the regret action completes. |
Item(s) Cancelled | Review the selected item state after the cancellation action completes. |
Item(s) Rejected | Review the selected item state after the rejection action completes. |
Result: The corrected action is submitted, or the relevant message remains visible.
An action or field may be unavailable when the order is not saved, has unsaved changes, is outside the order-through-delivered range, lacks edit access, or is in a state that does not satisfy that action's condition. Approval and award actions also depend on approval and mail configuration.
Out of scope messages
Messages about work before or beside the purchase-order panel belong to their focused pages:
| Message | Page that owns it |
|---|---|
Required Offer Type field is mandatory | The purchase-job RFQs page |
Required Bid Due Date field is mandatory | The purchase-job RFQs page |
Inquiry must have at least one item | The purchase-job RFQs page |
Offer must have at least one item | The purchase-job quotations page |
Check RFQ mandatory field(s) | The purchase-job RFQs page |
Please insert at least one RFQ | The purchase-job RFQs page |
Product package deleted from all inquiries | The purchase-job product-packages page |
Product package deleted from all offers | The purchase-job product-packages page |
Product package deleted from all orders | The purchase-job product-packages page |
Package products cannot be empty | The purchase-job product-packages page |
Converted to inquiry successfully | The purchase-job conversions page |
Converted to offer successfully | The purchase-job conversions page |
Forbidden characters detected. Please remove them and try again. | Comments, files, and history on a purchase job |
You already have a contact with this name | The purchase-job contacts page |
Your request was completed successfully | The purchase-job files page |
Just '_'‘-''.' And '&' Characters Accepted | The purchase-job files page |
Job reactivated successfully | Purchase job record |
These messages do not describe order validation. Follow the focused page that owns the RFQ, quotation, package, conversion, contact, attachment, or file operation.
What happens next
After order-side work is complete, continue with the task that matches the next record surface.
| Next need | Continue with |
|---|---|
| Review comments, files, or audit history | Comments, files, and history on a purchase job |
| Work with the broader purchase-job record | Purchase job record |
| Handle physical receipt, stock, or warehouse fulfillment | Warehouse fulfillment flow |
| Continue with purchase invoices | Select Purchase Invoices, then use the invoice page for that work. |
| Return to the procurement chain | Purchase job workflow |
Was this page helpful?