Skip to content
D
Documentation

Assembly orders

task
8 min readUpdated

Create or locate the Project management record used to assemble products, then save the order with its sales item, products, quantities, and dates.

Overview

An assembly order is the Project management record for assembling products for a project. Project management brings together bill-of-materials (BOM), ordering, stock, and delivery work; PAMS connects BOMs, material requisitions (MRQs), requests for quotation (RFQs), purchase orders (POs), warehouses, and delivery in the project cycle.

If you need to…Go to
Understand the information needed before you startPrerequisites
Open the assembly-order list or a new orderFind an assembly order
Identify fields, product areas, and tabsUnderstand the Assembly Order screen
Enter products and save the orderCreate and save an assembly order
Check which actions change with the order stateHandle new, existing, and optional order states
Correct a validation or processing problemResolve validation and access problems
Continue with related Project management workKnow what comes next
Review the wider Project management areaProject management workspace
Continue with warehouse workWarehouse fulfillment flow

Prerequisites

Inventory identifies the warehouse record used by the order. Sales Order No. and Sales Item Description identify the sales order and sales item that the assembly order serves. The selected sales item can supply Final product, Qty, Unit, and Name when those values are empty.

Before you startWhat applies
InventoryInventory is required. Its choices are warehouse records loaded for your company.
Sales orderSelect a value in Sales Order No.. This selection is required before the order can use Product.
Sales itemSelect a value in Sales Item Description. This selection is required before the order can use Product.
Order dateOrdered on is required. The new-order date sets it.
CompletionCompleted on and Completed by are required only for a completed process.
Edit accessSave and Save and Close appear only when you may edit. They are disabled when there are no data changes.

The Product action is available only for an unsaved order with both the sales order and sales item selected. The available choices for Inventory, Sales Order No., Sales Item Description, Ordered by, and Completed by come from data loaded for your company rather than from a fixed list on the form.

Find an assembly order

The assembly-order list is the place to identify saved orders or start a new one. Open it from the Project management area.

Prerequisites

  • You can open the Project management area.
  • You know whether you are locating an existing order or creating a new one.

Steps

  1. Open the assembly-order list from the Project management area.

  2. Select the work view that matches the order stage.

    If you need to…Select
    Review all visible workAll
    Prepare a bill of materialsBOM Preparation
    Review current material requisitionsCurrent MRQs
    Review purchasing workIn Purchasing
    Review stock workIn Stock
    Review delivered workDelivered
    Review assembly ordersAssembly Orders
  3. Identify a saved row from Sheet no., Job no., P.M responsible, Order date, Item description, or Expected complete on.

  4. Open the list entry that matches the work you need to do.

    If you need to…Open
    Review or continue an existing orderThe saved row
    Create an assembly orderA blank assembly-order form
  5. Select the toolbar action that matches your task.

    If you need to…Select
    Reload the listRefresh
    Change the list layoutTable Layout
    Open list settingsSettings

The list contains rows and can draw Sheet no., Job no., P.M responsible, Order date, Item description, and Expected complete on. Your list layout determines the columns visible in the list.

Note: Work from the headers visible in your list. A different list layout can draw a different set of columns.

The assembly-order list with its work views, rows, columns, and toolbar controls

Result: The assembly-order list is open with rows and its available work views, or the blank assembly-order form is open.

Understand the Assembly Order screen

The Assembly Order screen combines order information, a product lookup, component rows, and receiving and inspection areas. Use the information area for the order header and the product area for the products that make up the assembly.

AreaWhat you see
Order informationInventory, Sales Order No., Sales Item Description, Time Frame, Ordered by, Ordered on, Final product, Qty, Unit, Name, Completed on, and Completed by
Product work areaProduct, with Product, Used qty, and Unit columns
Products popupProduct, Unit, and Sales item, with OK
Receiving areaWarehouse, Recieved by, Recieved on, Sub-supplier, and Sub-supplier shipment no.
Inspection areaInspected by, Inspected on, GRN No., Sub-supplier, Client, Checklist, Documents, Product, Ordered Qty., Received Qty., Accepted qty, Rejected qty, Defect, and Defect category

The screen lists Receiving sheet, Inspection sheet, Transfer history, and Last Modifications tabs. It also lists Comments, but the page-level Comments tab is not available on this screen.

The Defect category choices are minor, major, and critical. The receiving and inspection areas contain the fields needed for those surfaces.

The new Assembly Order form with order fields, Product, and component columns

Create and save an assembly order

Create an assembly order when the sales order and sales item are known and the products to assemble are ready to record.

Prerequisites

  • You are on the new assembly-order form.
  • You can select Inventory, Sales Order No., and Sales Item Description.
  • You know the person and date to use for Ordered by and Ordered on, where those fields are available.
  • You know which products belong in the assembly.

Steps

  1. Select Inventory.
  2. Select Sales Order No..
  3. Select Sales Item Description.
  4. Select Ordered by, where the field is available.
  5. Select Ordered on, where the field is available.
  6. Review Final product, Qty, Unit, and Name. The selected sales item can fill these values when they are empty.
  7. Select Product.
  8. In the Products popup, select the products to add.
  9. Select OK.

The selected products appear as component rows with Product, Used qty, and Unit. If the form or product list needs correction, saving validates both before it sends the request.

The Products popup and selected component rows before saving

Result: The selected products appear as component rows and the order is ready for saving.

Save the assembly order

Save after the order fields and component rows are complete. Use the option that matches whether you need to continue working on the saved record.

Prerequisites

  • The order contains the required selections and at least one product row.
  • You may edit the order and the form has data changes.

Steps

  1. Select one save option:

    If you want to…Select
    Keep the saved order openSave
    Save the order and leave the formSave and Close
  2. Confirm the message Your request was completed successfully.

Saving can display Check mandatory field(s) when a required field is incomplete. If a product does not have the required storage information, correct it when the form displays Please enter the storage area and position for each product before saving again.

Result: The assembly order is saved, the selected products remain in its component area, and Your request was completed successfully confirms the request.

Handle new, existing, and optional order states

An order's state changes which order actions and supporting surfaces you can use. Start with the new-order path, then use the saved record for later work.

Order situationWhat you can use
New and unsaved, with both sales selectionsProduct is available for adding products.
New and unsaved, without either sales selectionComplete the sales selections before using Product.
Saved orderContinue from the saved record and use the save controls when editing is allowed.
Saved order with productsReview the component rows before saving later changes.
Saved inspection details, unchanged record, and unreleased itemsFinish and release to stock is available.

Resolve validation and access problems

When the screen stops an action, match its exact message to the correction below.

MessageWhat to do
Please enter the storage area and position for each productEnter the storage area and position for each product, then save again.
You cannot save without adding at least one productSelect Product, add at least one product, select OK, and save again.
Check mandatory field(s)Complete the fields marked as required, then save again.
Package products cannot be emptyAdd the required products to the product list before saving.
An error occurred while processing your requestReview the order and product list, correct any displayed issue, and retry the action.

The screen validates before saving and protects navigation with a leave-screen check. Save only when you may edit and when the order has changes to commit. If an option or list column differs from the choices above, use the options and headers displayed in your form or list.

Know what comes next

A saved assembly order remains part of the Project management area that groups ordering, stock, and delivery work. Shipping orders are the companion Project management task. Continue with Warehouse fulfillment flow when warehouse fulfillment is the next task in your role.

The label Finish and release to stock identifies an available action only when the saved inspection details, unchanged record, and unreleased-item conditions are met. Do not treat that label alone as confirmation of a stage transition or stock effect.

Was this page helpful?

Need help using the product?