Skip to content
D
Documentation

Edit branch logo

reference
10 min readUpdated

Edit branch logo

An existing branch record holds the branch information used in company administration, together with its logo, contact information, address, currency, margin settings, and modification history. Use this page to update the record, change or remove its logo, and save the result.

A logo is the image associated with the branch record.

If you need to…Go to
Open an existing branchFind and open the branch
Change or remove the logoAdd, replace, or remove the logo
Change branch, address, currency, or contact informationBranch fields and Save branch and contact changes
Review default-margin settingsReview default-margin settings
Read recorded changesReview history
Create a branch that does not exist yetNew branch
Work from the branch listBranches
Continue with the general existing-branch pageEdit branch

Before you start

The edit page works on a saved branch record. The branch must already exist, and the page must load the branch together with an included subscription before the record form and its lower review areas are available.

Prerequisites

  • Have the branch you need to change already saved.
  • Have a subscription included for the page to display the branch body.
  • Have the branch identifier available through the branch record before using the lower tabs.
  • Have the branch information, contact values, address values, currency choices, and logo file you intend to use.

Open the branch from the Branches list to work on an existing record. The branch form requires both an included subscription and a branch; the lower tabs require the branch identifier.

Find and open the branch

The Branches page is the list used to select an existing branch before you edit its record.

Prerequisites

  • Have a saved branch to open.

Steps

  1. Open Configurations.
  2. Open Company.
  3. Select Branches.
  4. In the branch list, select the row for the branch you want to edit.
  5. Select the row's edit link to open the existing-branch record.

The Branches list uses Branch Name, Country, and Mail. Its available list actions include New, Branches, Refresh, Table Layout, and Settings. Select the edit link in the row for the branch you need.

Select the branch row from the Branches list before opening its edit record.

Result: The selected branch's edit record is open.

With the record open, first identify the fields and conditional areas, then make the required branch or logo changes.

Understand the branch screen

The branch screen is a form for one existing branch. Its upper area contains the main branch information and the logo actions; its lower area contains contact information and saved-record review tabs. The screen has 29 controls, two containers, one validation group, and 40 actions. Work from form fields and tabs; this screen does not present a data grid.

AreaWhat to use it for
Branch information formMaintain identity, company, tax, financial-year, currency, and address values.
Logo actionsUpload a logo or remove the current logo when the corresponding branch value exists.
Contact InformationMaintain the branch's repeated contact values.
Default tabReview the saved branch's default-margin area.
Last Modifications tabRead the branch's recorded changes.
SaveSave the changed record and remain on the record.
Save and CloseSave the changed record and return to the previous location.

The lower review tabs appear for a saved branch with the branch identifier. The tabs are Default and Last Modifications.

Use the field reference before moving to the conditional areas below it.

Branch fields

Branch fields identify the branch and supply the company, tax, financial-year, currency, and address information used by the record.

GroupFieldRule or option source
IdentityDisplay NameRequired only when the value is empty and the configuration makes it applicable.
IdentityFull NameNo required rule is named.
IdentityStatementNo required rule is named.
CompanyManaging DirectorNo required rule is named.
CompanyCompany Registration No.No required rule is named.
TaxVAT ID NumberNo required rule is named.
TaxVatRateAccepts values from 0 through 100.
Financial yearFinancial Year StartThe day and month are configurable when empty.
CurrencyReference CurrencyRequired; disabled when jobs exist. Options come from the returned company-currency records and display Name while storing CurrencyCode.
CurrencyLocal currencyRequired. Options come from the returned company-currency records and display Name while storing CurrencyCode.
AddressStreetAppears when the branch has an address.
AddressZip CodeAppears when the branch has an address.
AddressCountryAppears when the branch has an address. Options display Name and store CountryCode.
AddressStateAppears when the branch has an address.
AddressCityAppears when the branch has an address.

For Financial Year Start, the day choices are 1 through 31.

Month choices
January, February, March, April
May, June, July, August
September, October, November, December

Tabs and conditional areas

The lower areas appear according to the saved branch and its values. The Default tab is the default-margin review area, and Last Modifications is the history area. Address fields require branch.Address; contact rows repeat from branch.ContactInfoList.

AreaWhen it appears
Address fieldsWhen the branch has Address.
Contact rowsFor the values in ContactInfoList.
Default-margin number boxFor the fixed-percentage margin type.
Degressive margin areaFor accumulative or decreased-percentage margin types.
Saved-record tabsWhen the branch has the branch identifier and the page body has a branch with an included subscription.

The active saved-record tab is Default for the default-margin area or Last Modifications for the history area.

After checking which areas are present, continue to maintain the logo and branch values.

Maintain the logo and branch changes

Maintain the logo from the record context while updating branch values, so both changes apply to the same branch.

Prerequisites

  • Have the existing branch open.
  • Have an image file ready if you are adding or replacing the logo.

Steps

  1. Enter the branch values you need to change in the main form.
  2. Choose one logo operation in Add, replace, or remove the logo.

Note: The Upload Logo surface accepts one image file. It provides Attach and Browse for the file choice. The delete action is available only when the branch has a logo identifier.

Result: The branch values remain in the open record, and the selected logo operation is ready to complete or has completed.

Use the operation table below when you need a specific add, replace, or remove path.

Use the logo operation that matches the state of the branch: attach an image to add a logo, attach another image to replace the current one, or confirm deletion to remove it.

Prerequisites

  • Have the branch edit record open.
  • Have one image file ready for an add or replace operation.
If you need to…Use this operation
Add a logo to a branch without oneIn the logo area, select the control that opens the upload surface, then use Attach and Browse to choose one image file.
Replace the current logoIn the logo area, select the control that opens the upload surface, then attach the replacement image as one file.
Remove the current logoSelect the control immediately beside the current logo to open the removal confirmation.

Steps

  1. Choose one operation:

    If you need to…Do this
    Add or replace the logoIn the logo area, select the control that opens the upload surface.
    Remove the logoIn the logo area, select Delete item.
  2. If you are adding or replacing the logo, select Attach.

  3. If you are adding or replacing the logo, select Browse.

  4. If you are adding or replacing the logo, choose one image file.

  5. If you are removing the logo, read Are you sure you want to delete this item?.

  6. If you are removing the logo, select Yes to confirm the removal.

  7. If you are cancelling the removal, select No.

For a confirmed removal, the logo is removed and Logo Deleted Successfully appears. Cancelling with No leaves the logo in place.

Result: The branch has the attached image, retains its existing logo, or has the logo removed after the confirmation choice.

After the logo operation, continue to save the branch and contact changes.

Save branch and contact changes

Saving commits the changed branch record, including branch fields, address, currency, and contact information. The contact choices are Phone, Fax, Mobile, Email, Website, and Online Support; phone, fax, and mobile values have a maximum length of 20.

Prerequisites

  • Complete the branch changes you want to keep.
  • Resolve any logo confirmation before saving.
If you need to…Select
Save and continue working on this recordSave
Save and leave the recordSave and Close

Steps

  1. Select Save to remain on the branch record or Save and Close to leave it.
  2. Read Branch saved Successfully.

Result: Save keeps you on the record. Save and Close returns you to the previous location after the branch changes are saved.

After saving, review the Default margin area or Last Modifications history as needed.

Review the margin and history branches

The saved branch record has two review routes: Default for default-margin settings and Last Modifications for recorded changes. Both routes belong to the saved branch and are available through the lower tabs when the branch has the branch identifier.

The saved-record tabs are Default and Last Modifications. A Registration tab is declared in the source but is not available as a branch review area.

Review default-margin settings

Default-margin settings describe the margin method used as the branch's default. Select the margin type to see the controls associated with that method.

Prerequisites

  • Have the branch saved.
  • Open the Default tab.
Margin typeArea available
Fixed PercentageA default-margin number box.
Descending AbsoluteThe degressive margin area.
Descending AccumulativeThe degressive margin area.

The nominal commission and nominal margin controls are not part of the available area. A cumulative-margin currency choice is also not part of the available area.

Steps

  1. Select the margin type you need to review.
  2. Read the number box for Fixed Percentage, or read the degressive margin area for Descending Absolute or Descending Accumulative.

Result: The default-margin controls for the selected margin type are visible.

Return to the review-area section to inspect the saved history when that is the next task.

Review history

History is the branch's recorded modification view. Open Last Modifications to review the available audit-log entries and filters, then return to Default when you need the margin area.

Prerequisites

  • Have the branch saved with its branch identifier.

Steps

  1. Select Last Modifications.
  2. Read the audit-log entries and use the available audit-log filters.
  3. Select Default to return to the default-margin area.

Result: The branch's Last Modifications history is open, or the default-margin area is open again.

If a save or review action produces a message, use the correction table that follows.

Resolve validation and action failures

Use the message on screen to choose the correction. The table maps each message to the next action. When default-margin data is saved, the message Data saved Successfully appears.

MessageAction
Name is requiredEnter the required name value in Display Name and save again.
Just '_' '-' And '.' Characters AcceptedCorrect the name so it uses the accepted characters, then save again.
Please insert degressive margin listAdd the required degressive margin list before saving the margin settings.
Error: Server ErrorCheck the branch values and repeat the action.
Error while saving data Review the form and repeat Save or Save and Close.
Branch saved SuccessfullyContinue on the record after Save, or leave after Save and Close.
Data saved SuccessfullyContinue from the saved default-margin area.

Name is required is the required-name validation message. The character message is the corresponding accepted-character validation message. The degressive-margin message appears when the required margin list is missing.

Out of scope

Branch does not exist applies when the selected branch is missing, rather than to the editing actions on this existing-branch page. Return to the branch list and open an existing branch record when this message appears.

Continue after branch editing

After saving, the branch record contains the changes you kept. Save leaves you on the record for further review. Save and Close returns you to the previous location. From there, continue with Branches, open New branch when a new branch is needed, or use Edit branch for the general existing-branch editing task.

Was this page helpful?

Need help using the product?