Skip to content
D
Documentation

Create a sales job

task
13 min readUpdated

Use this page to start a sales job, complete its shared information, save it, and continue in the saved sales-job workspace.

Overview

A sales job is the shared record for sales work that continues through the sales stages. A Potential is an early sales opportunity recorded before a formal customer request exists. An Inquiry is the formal customer request that carries the client, vendor, requested items, and bid due date needed to prepare an offer. A normal Inquiry starts at the Potential stage; after you create it, the saved record opens in the edit workspace where you continue the job.

Creation begins from the sales-job lists. The normal Inquiry route opens the new-job form, and a saved job continues in the Sales edit workspace. Start with the shared header and route-specific entry point, then save the record. Detailed Potential and Inquiry panels, their item grids, and later lifecycle work continue on their focused pages.

If you need to…Go to
Check which creation route to useFind or open a sales job
Recognize the shared form and its stage-dependent areasUnderstand the sales-job form
Fill the common fieldsEnter the main job information
Complete Potential or Inquiry details and itemsComplete the applicable stage details and items
Correct a blocked saveSave the sales job and handle validation
Follow the saved job through its stagesSales job lifecycle
Locate an existing job in a listFind sales job work
Work with Potential-specific detailsPotentials
Work with Inquiry-specific detailsInquiries
Work with item rowsSales job items
Review the saved recordSales job record
Follow up with tasks or activitiesSales job comments and tasks; Sales job activities and files
For a normal Inquiry, complete the client and vendor, the responsible salesperson, product type, job title, bid due date, and an item before selecting Save. For a Potential, complete the same shared information and item-entry pattern.
The blank new sales-job form with the creation route visible

When a normal Inquiry is created, its Estimated Value is copied to each created sales potential.

Prerequisites — what must be in place for this to go smoothly

Before creating a sales job, the Sales Jobs subscription and permission to create a new job must be available. Have the responsible salesperson, product type, job title, parties, and any route-specific details ready. The form checks the information before saving, so a changed record is required before the save controls become available.

What must be in placeWhy it matters
Sales Jobs subscriptionThe sales-job creation surface is available only when the subscription includes it.
Permission to create new jobsWithout it, creation is refused.
Salesperson, product type, and job titleThese shared fields are required before creation.
Client, Vendor, due date, and item information for an inquiryThe Inquiry route requires its party and due-date information and uses item rows.
A changed formSave and Save and Close become available after a change.

If the subscription or permission is unavailable, creation does not proceed. The access message is shown as You don’t have permission to create new jobs.

Note: The required marker for configurable fields follows company configuration. Review the markers shown beside Salesperson Responsible, Product Type, Job Title, File Number, Client, Vendor, Bid Due Date, and any other visible configurable field.

Find or open a sales job

The sales-job lists separate work by stage, while Add new opens the available starting points for a new job. Use the stage list when you need an existing record; use a creation choice when you are starting a new one.

If you need to…Select
Open all sales jobsAll
Open early opportunity workPotentials
Open inquiry workInquiries
Open offer workOffers
Open order workOrders
Start a new inquiryInquiry under Add new
Start a direct orderDirect order under Add new
Start a standing job when it is availableStanding job under Add new

Prerequisites

  • You can access the Sales Jobs area.
  • You know whether you need a new job or an existing record.

Steps

  1. Open the Sales Jobs list.

  2. Select Add new.

  3. Select the starting point that matches the work.

    If you need to…Select
    Begin the normal inquiry routeInquiry
    Begin early opportunity workPotentials
    Begin an order directlyDirect order
    Begin a standing job when the option is shownStanding job
  4. For an existing job, select the stage list that contains it.

  5. Select the job's data row.

The available stage lists are All, Potentials, Inquiries, Offers, and Orders. Selecting Direct order under Add new opens Order.

Result: A new-job form or the selected sales-job record is on screen. If you are creating a job, continue by reviewing the shared form.
The Add new menu with the available creation choices

Understand the sales-job form

The new-job form is the shared workspace for the job header and the stage area selected by the route. Its fixed header includes the job status and common information; company configuration can add custom fields and change which fields are required.

AreaWhat to look for
HeaderSave, Save and Close, and Reset.
Fixed informationStatus, Branch, Salesperson Responsible, Product Type, and Job Title.
Additional shared informationEnd User, Estimated Value, File Number, and Expected Order Date.
Company-configured informationAdditional fields your company has configured.
Stage areaThe selected route's panel and item work.
Assessment informationOrder chance, with related assessment fields where shown.

The visible stage labels include Inquiry, Offer, Order, and Delivered. The form also displays In Branch Currency (Rate:1) and Calculated Rating as readouts. Picker and date controls open without changing the record.

Prerequisites

  • Open a new sales-job route.
  • Do not need to save while inspecting the form.

Steps

  1. Read the fixed header fields before opening a stage panel.
  2. Select Reset only when you need to discard the current form changes.
  3. Select New inquiry to open the inquiry-specific area.
  4. Open each picker or date control only when you need to inspect its choices.
Result: The shared header and the selected stage area are visible, with company-configured fields and stage-dependent controls appearing where they apply.
The shared sales-job header, fixed fields, and stage area

Enter the main job information

The main information identifies who owns the work, what is being sold, and how the job can be found later. Complete these fields before saving; the form checks the information before saving.

FieldWhat to enter
Salesperson ResponsibleSelect the person responsible for the sales job.
Product TypeSelect the product type for the job.
Job TitleEnter the job title. The title accepts letters, spaces, _, -, and .; special characters are rejected.
End UserSelect the end user when the field is required by your configuration.
Estimated ValueEnter the estimated value when the field is required by your configuration.
File NumberEnter the file number when the field is required by your configuration.
Expected Order DateSelect the expected date when the field is shown for the selected stage.

Estimated Value cannot be less than 0. For a new job, Expected Order Date cannot be earlier than today.

Prerequisites

  • You have opened the new-job form.
  • You have the responsible salesperson, product type, and job title.
  • You have the estimated value, file number, end user, and expected date when your route or company configuration requires them.

Steps

  1. In Salesperson Responsible, select the responsible salesperson.
  2. In Product Type, select the product type.
  3. In Job Title, enter the job title.
  4. In End User, select the end user when the field is required for your job.
  5. In Estimated Value, enter the estimated value when the field is required for your job.
  6. In File Number, enter the file number when the field is required for your job.
  7. In Expected Order Date, select the expected order date when the field is shown for your stage.
  8. Review the visible required markers before saving.

If a required value is empty, the form uses This field is required. If the job title contains an unsupported character, it uses Just '_' '-' And '.' Characters Accepted.

After you complete the shared fields, continue to the applicable stage details.
The shared fields before stage-specific details are entered
Result: The visible shared requirements are complete and the form is ready for the applicable stage details.
The required markers on the shared and stage-specific fields

Complete the applicable stage details and items

Stage details belong to the route you selected. An Inquiry uses its inquiry panel and item rows; a Potential uses its Potential-specific panel and item rows. The shared header does not contain the party, inquiry, or item-row fields owned by those panels.

RouteContinue with
InquiryNew inquiry, then Client, Vendor, Client Inquiry Number, Inquiry Date, Bid Due Date, and Requested Offer Type, followed by the inquiry item row.
PotentialThe Potential-specific panel and its item row.
Direct orderThe Order route and its order-specific details.
Standing jobThe standing-job route when it is available.

For an Inquiry, the stage-specific controls include Client, Vendor, Client Inquiry Number, Inquiry Date, Bid Due Date, and Requested Offer Type. Inquiry Date cannot be later than today, and Bid Due Date cannot be earlier than the inquiry date. The inquiry item grid provides Item Description, Unit, and Qty. These stage-specific fields and item procedures belong to the focused Potential, Inquiries, and Sales job items pages.

The shared header does not provide Client, Vendor, Bid Due Date, Client Inquiry Number, Inquiry Date, Requested Offer Type, Item Description, Unit, or Qty. Expected Order Date also depends on the stage: it is not shown for a Potential, project-management stage, or Order-or-later stage.

Prerequisites

  • Complete the shared fields.
  • Know whether you are creating an Inquiry, Potential, Direct order, or Standing job.

Steps

  1. Select the stage panel for the route you opened.
  2. For an Inquiry, select New inquiry.
  3. In Client, select the client.
  4. In Vendor, select the vendor.
  5. Complete the other visible inquiry fields that apply to your configuration.
  6. In the item grid, complete the visible item row before saving.
For the normal Inquiry route, the focused Inquiry page owns the detailed panel and item procedure. For Potential work, continue with the focused Potential page.
The opened Inquiry panel and its stage-specific controls
Result: The route-specific information and applicable item row are complete, and the sales job is ready to save. Continue with the save procedure.
The Inquiry fields and item area

Save the sales job and handle validation

The form checks the information before saving. A successful save navigates to the saved edit workspace; it does not rely on a creation-success confirmation dialog or create-success toast. Save and Close follows the save-and-close path instead of leaving the new-record form open.

What you seeWhat it meansWhat to do
Please Solve the Following Issues :Validation found one or more problems.Read the listed field messages and correct each one.
Sales Responsible is requiredThe responsible salesperson is empty.Complete Salesperson Responsible.
Product type is requiredThe product type is empty.Complete Product Type.
Job title is requiredThe job title is empty.Complete Job Title.
Job title must not contain special charactersThe title contains an unsupported character.Remove the unsupported character and keep only the accepted title characters.
You don’t have permission to create new jobsYour access does not permit creation.Ask an administrator to grant the required create permission.
An error occurred while processing your requestThe creation request did not complete.Remain on the form, review the values, and retry when the issue is resolved.
Custom fields saved successfullyCustom-field changes were saved.Continue with the next visible form area.
Job updated successfullyThe existing job was updated.Continue in the saved job.
Converted to inquiry successfullyThe job was converted to an inquiry.Continue with the Inquiry details.
Check mandatory field(s)A required field is empty.Review the visible required markers and complete those fields.
Please save opened inquiry firstAn opened inquiry needs to be saved before the next action.Select Save, then repeat the action.
One or more items has ZERO quantityAn item quantity is zero.Enter a quantity greater than zero in the affected row.
One or more items has no unitAn item has no unit.Select a unit in the affected row.
Error saving custom fieldsCustom-field saving did not complete.Review the custom fields and select Save again.
An account with this name already existsAn account with the entered name already exists.Use the existing account or enter a different name.
An project with this name already existsA project with the entered name already exists.Use the existing project or enter a different name.
Required Receiving DateA receiving date is required.Enter the receiving date.
This field is requiredA required field is empty.Complete the field named beside the message.
Invalid input. The value must be greater than 0 and cannot exceed 999,999.00The number is outside the allowed range.Enter a value greater than 0 and no greater than 999,999.00.
Invalid input. Please enter a non-negative valueThe number is negative.Enter 0 or a positive value.
Your request was completed successfullyThe requested operation completed.Continue with the next visible action.
Forbidden characters detected. Please remove them and try again.The value contains forbidden characters.Remove the forbidden characters and retry.
Required Receiving AfterA receiving-after value is required.Enter the receiving-after value.
Package must have at least one itemThe package has no item.Add at least one item before saving.
Required Offer TypeAn offer type is required.Select Requested Offer Type.
Required Bid Due DateA bid due date is required.Select Bid Due Date.

Prerequisites

  • Complete the shared and applicable stage information.
  • Change at least one value so Save or Save and Close is available.
  • Have permission to create new jobs.

Steps

  1. Select Save.

  2. If Please Solve the Following Issues : appears, read each validation message.

  3. Select the field named by each message.

    If the message is…Correct…
    Sales Responsible is requiredSelect Salesperson Responsible, then enter a value.
    Product type is requiredComplete Product Type.
    Job title is requiredComplete Job Title.
    Job title must not contain special charactersSelect Job Title and replace its value with letters, spaces, _, -, and ..
  4. Enter a value in each named field.

  5. Select Save or Save and Close.

After you correct the fields, select Save or Save and Close again.
The validation state beside the required fields

Result: A successful Save opens the saved sales-job edit workspace. A successful Save and Close follows its save-and-close path. A refused save leaves the form available for correction; no creation-success dialog or create-success toast is shown. Continue with the saved sales-job lifecycle.

Out of scope messages

The following message belongs to delivery-state work, not to creating a sales job:

MessageWhere to continue
Cannot be un-delivered — a due invoice already existsContinue with the invoice work before changing delivery.

Continue with the sales-job lifecycle

A saved sales job is the record you continue through the sales flow. The saved edit workspace keeps the shared record with its stage work and related follow-up areas; the visible stage and related-work areas depend on the job and available subscriptions.

The estimated value is part of the shared information carried into the saved job. After the save, open the visible stage or related-work area that matches your next task. A saved record can expose Tasks, Activities, and Attachment.

Prerequisites

  • The sales job is saved.
  • You know whether your next action concerns its stage, a task, an activity, or an attachment.

Steps

  1. Read the visible stage and Status on the saved record.

  2. Select the visible stage tab for the next lifecycle action.

  3. Select the related-work area that matches your next task.

    If you need to…Select
    Follow up on assigned workTasks
    Review recorded workActivities
    Review files attached to the jobAttachment
Result: The saved sales job is open in its edit workspace, with the visible lifecycle and follow-up areas ready for the next task.
The saved sales-job workspace and its shared information

Was this page helpful?

Need help using the product?